ログイン
言語:

WEKO3

  • トップ
  • ランキング
To

Field does not validate

To

Field does not validate



インデックスリンク

インデックスツリー

  • RootNode

メールアドレスを入力してください。

WEKO

One fine body…

WEKO

One fine body…

アイテム

  1. 400 金属材料研究所
  2. 東北大学研究所報告. A集, 物理学・化学・冶金学

Effect of Aging on the Maximum Permeability in Quenched Fe-Al Alloys (Alperm)

http://hdl.handle.net/10097/27088
http://hdl.handle.net/10097/27088
93678141-6809-4cea-882b-f4504ae0b5f5
名前 / ファイル ライセンス アクション
KJ00004196996.pdf KJ00004196996.pdf (72.8 kB)
Item type 紀要論文 / Departmental Bulletin Paper(1)
公開日 2008-05-02
タイトル
タイトル Effect of Aging on the Maximum Permeability in Quenched Fe-Al Alloys (Alperm)
言語
言語 eng
資源タイプ
資源タイプ識別子 http://purl.org/coar/resource_type/c_6501
資源タイプ departmental bulletin paper
著者 SAITO, Hideo

× SAITO, Hideo

SAITO, Hideo

Search repository
抄録
内容記述タイプ Abstract
内容記述 "Alperm" is a high permeability iron-aluminium alloy containing 10 to 17 percent aluminium, which was discovered by Dr. H. Masumoto and the present author in 1939^<(1)>, and at present, the alloy containing 16 percent aluminium is widely used. The alloy is called Alfenol 16 in U.S.A., Vacodur 16 in Germany and IU 16 in U.S.S.R. There is some belief that Alperm shows magnetic aging, resulting in a decrease of permeability, which is believed to happen after quenching. To confirm whether there is any aging effect or not in Alperm, the present auther measured the change of magnetic properties in various Alperm alloys over a period of more than 2 years after quenching. The specimens used are rings, 60 mm in outer diameter, 46 mm in inner diameter, and 0.5 mm thick, which were cut out from plates of iron-aluminium alloys containing 18.9, 14.7 and 15.1 percent aluminium. The specimens were heated at 1000℃ for 1 hour in vacuum, cooled in the furnace to 600℃ in the case of 13.9 percent aluminium alloy and to 570℃ in the case of 14.7 and 15.1 percent aluminium alloys, and then quenched in oil after being kept at the above temperatures for 10 minutes. Four or five specimens of each alloy were stacked, and a magnetization coil and a search coil were wound on the stacks after they were covered by thin insulation tape. The measurements were made by the ballistic galvanometer method. According to results of the measurements, it was found that there is no time change in the maximum permeability (μ_m) in the alloy containing 13.9 percent of aluminium, but for alloys containing 14.7 and 15.1 percent of aluminium, μ_m increases with time after quenching and reaches a finite value, the increase being larger for the latter alloy. These changes of μ_m may be caused by the relief of the elastic stress which was introduced by stacking ring specimens with plate surfaces curved slightly by quenching. From the results mentioned above, we may conclude that very little or no magnetic aging exists in Alperm. But even if the change of permeability mentioned above might be due to the aging, it is clear that the aging increases the permeability, which is rather favourable to the application.
書誌情報 Science reports of the Research Institutes, Tohoku University. Ser. A, Physics, chemistry and metallurgy

巻 14, p. 255-255, 発行日 1962
ISSN
収録物識別子タイプ ISSN
収録物識別子 00408808
書誌レコードID
収録物識別子タイプ NCID
収録物識別子 AA00836167
フォーマット
内容記述タイプ Other
内容記述 application/pdf
著者版フラグ
出版タイプ VoR
出版タイプResource http://purl.org/coar/version/c_970fb48d4fbd8a85
出版者
出版者 Tohoku University
資源タイプ
内容記述タイプ Other
内容記述 紀要類(bulletin)
登録日
日付 2008-05-02
日付タイプ Created
公開日(投稿完了日)
日付 2008-05-02
日付タイプ Created
発行日
日付 1962
日付タイプ Created
フォーマット
内容記述タイプ Other
内容記述 72792 bytes
更新日
日付 2010-01-27
日付タイプ Created
戻る
0
views
See details
Views

Versions

Ver.1 2023-07-27 13:13:16.730680
Show All versions

Share

Mendeley Twitter Facebook Print Addthis

Cite as

エクスポート

OAI-PMH
  • OAI-PMH JPCOAR 2.0
  • OAI-PMH JPCOAR 1.0
  • OAI-PMH DublinCore
  • OAI-PMH DDI
Other Formats
  • JSON
  • BIBTEX

Confirm


Powered by WEKO3


Powered by WEKO3